What is Tremco Dymonic FC used for?
Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding. Dymonic FC is fast curing with a skin time of 60 min and a tack-free time of 3 to 4 hr to significantly reduce dirt attraction.
What is Dymonic polyurethane sealant used for?
Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding.
Can you paint Tremco Dymonic 100?
Although Dymonic 100 is paintable, this does not imply adhesion to and compatibility with all paints. Consult Tremco Technical Bulletin No. S-09-05 for more information. Dymonic 100 typically adheres to common construction substrates without primers; anodized aluminum may require the use of primer.
How do I use Dymonic 100?
Dymonic 100 is easy to apply with conventional caulking equipment. Ensure that the backer rod is fitted properly for friction and that any necessary primers have been applied. Fill the joint completely with a proper width-to-depth ratio, and then tool to ensure intimate contact of sealant with joint substrates.
How do you use Tremco Dymonic FC?
Tremco Dymonic FC is easy to dispense with conventional caulking equipment. Ensure that the backer rod is friction-fitted properly and any primers that have been applied. Fill the joint completely with a proper width-to-depth ratio and tool to ensure close contact of the silicone sealant with the joint walls.
Is NP1 waterproof?
NP1 isn’t merely water-tight, it can be fully submerged in water without losing its grip or seal. While not recommended for applications that will remain permanently submerged, it can resist even the most powerful sources of water.
What is Tremco 830 for?
Tremco® 830 is a one-part, thermoplastic elastomer that provides a high- performance, flexible seal in glazing and siding applications. In glazing applications, Tremco 830 is used for face bedding, cap beads and sealing miter joints in window profiles.
What is a backer rod used in caulking?
What is a backer rod and what does it do? Backer rods are usually round, flexible lengths of foam that are used as a “backing” in joints or cracks to help control the amount of sealant/caulking used and create a back stop. Many sizes/diameters are available for optimal fitting to the size of the joint being sealed.
At what temperature can you use Vulkem?
Vulkem 116 generally cures at a rate of 1/16″ (2 mm) per day at 75 °F (24 °C) and 50% RH. It will skin in 5 hr and be tack free in 30 hr. The cure time will increase as temperatures and/or humidity decrease. A good rule of thumb is one additional day for every 10 °F decrease in temperature.
Is Dymonic FC UV resistant?
Dymonic FC is also low-VOC, paintable and will not crack or craze under UV exposure.
Can you use NP1 in the rain?
As long as the surface to which you are applying the Np-1 is completely dry, you can apply this product. If you think it will rain within 1 or 2 hours after application… wait.
How long does NP1 caulk last?
Size: 10.1 Oz. Size: 10.1 Oz. Size: 10.1 Oz. Size: 10.1 Oz….$9.29.
| Size | 10.1 Oz. |
|---|---|
| Material | Polyurethane |
| Coverage | 26 LFT at a 1/4 In. Bead |
| Cure Time | 7 Days |
| Color Family | Grays |