What Eemua 146?
Shihang EEMUA 146 copper nickel fittings are alloys of Cu, Ni, Fe, Mn, Pb, S, P and Zn mixed in varying quantities for exceptional corrosion and erosion resistance. It comes as either EEMUA 146 CuNi 90/10 pipe fitting or EEMUA 146 CuNi 70/30 pipe fitting.
What Eemua 145?
EEMUA 145 flanges are one of the copper nickel flange standard. The standard includes composite weld neck flanges, composite slip on flanges , copper nickel weld neck flanges and copper nickel slip on flanges. EEMUA 145 flanges are mainly used on the offshore oil platform. Raw Material: 7060X.
What Eemua 144?
EEMUA 144 section 1 is for seamless copper nickel pipe. EEMUA 144 section 2 is for seam welded copper nickel pipe. Shihang EEMUA 144 Copper Nickel Pipes pull along with strong anti-corrosion properties which makes them suitable in many fields.
What is Eemua 234?
EEMUA 234 covers tubes (seamless and welded) for use in cooling and fire-fighting sea water service on offshore platforms, slip-on flanges (composite and solid), and fittings, including butt welding, socket welding, capillary brazing, compression, threaded, branch and saddle pieces.
What is uns 7060X?
UNS 7060X is a copper-nickel alloy that has anti-fouling properties against sea microorganism and seawater corrosion. This material is widely applied to offshore and related industries including shipbuilding and repairing, natural gas, petrochemical, and so on.
How is cupronickel made?
What is the Cupronickel? CuNi is an alloy made of Copper and Nickel with less than 0.5% of other alloys. It is also known as cupronickel. There are two popular combinations of CuNi; 70% Copper/30% Nickel or 90% Copper/10% Nickel.
Is cupronickel an alloy?
cupronickel, any of an important group of alloys of copper and nickel; the alloy containing 25 percent nickel is used by many countries for coins. Because copper and nickel mix readily in the molten state, the useful range of alloys is not confined within any definite limits.
Where is cupronickel used?
Cupronickel is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware. It is sometimes used for the propellers, propeller shafts, and hulls of high-quality boats.
What is cupronickel made from?
copper and nickel
cupronickel, any of an important group of alloys of copper and nickel; the alloy containing 25 percent nickel is used by many countries for coins. Because copper and nickel mix readily in the molten state, the useful range of alloys is not confined within any definite limits.
What is cupronickel made of?
Is cupronickel magnetic?
Cupronickels have a very low magnetic permeability <1.01. Magnetic permeability indicates the ease with which an external magnetic field can create a magnetic force of attraction in the metal.
Which is harder brass or silver?
Silver: 2.5-3. Aluminum: 2.5-3. Copper: 3. Brass: 3.